Grandstream HandyTone is an “All-In-1” VoIP IAD based on SIPstandard. Built upon Grandstream’s innovative technology，HandyTone features superb. Grandstream HandyTone is a multi-port, all-in-one Analog telephone adapter. It has one RJ11 FXS port(Telephone device), one RJ11 FXO port(Phone line). Grandstream Handytone Setup Guide. Grandstream Handytone ATA; Grandstream Handytone ATA; Grandstream Handytone ATA; Grandstream.
|Published (Last):||12 December 2018|
|PDF File Size:||19.98 Mb|
|ePub File Size:||16.61 Mb|
|Price:||Free* [*Free Regsitration Required]|
The configuration page should appear. Handytone users Handytone must be plugged into the LAN and connected to an analogue phone press the button on the Handytone, you should hear a menu prompt announcement on your analogue phone. Select dynamically assigned via DHCP from the items below: I do apartcipee the writing.
Type the web address into a web browser on a local PC. But how to enter grandtream IP addresses?
This value will change the default admin that was used to access the phone menu in step 2 above. Check these configuration instructions before continuing.
Find the MAC Address of the device. You will see the log in page of the device. The device will reboot automatically and restore to factory default settings.
For example IP address: Dial 02 and you should hear the IP Address.
To do this, just enter 12 digits for the new IP address. On the first screenshot of ” Basic Settings look belowyou can change the End user password account: If you are in static IP mode you can change the address.
Introduction Grandstream HandyTone is a multi-port, all-in-one Analog telephone adapter. Let say, we want to enter for static IP address This is not a mandatory step but we do recommend that you change the password. The phone’s IP Address should appear on the phone’s screen.
Grandstream Handytone HT Analog Adapter
You should see the granvstream login screen: Set Admin Password to a personal value. Update the firmware of your Grandstream device to the recommended firmware version.
Insert the Ethernet cable into the WAN port of HandyTone and connect the other end of the Ethernet cable to an uplink port a router or a modem, etc.
Grzndstream very first time to access the configuration page is always from LAN port. The instructions are listed above.
Insert the power adapter into the HandyTone and connect it to a wall outlet. Asterisk News Archives older news.
Grandstream HandyTone 488
So we have to press: In order to prevent automatic posting on our website, we kindly request you to type in the number you see in the picture below. Sending Fax from Zoiper to Zoiper using T. To test this dial Configure your SIP Registration settings as shown below: It is a grandstteam digits HEX number located on the bottom side of the unit. Upon rebooting, your phone should have connected to the VoIPtalk service. DO NOT include any leading zeros, so You should hear a confirmation message played back grsndstream you.
How i fix this problems?